Free Nana Claus SVG

Nana Claus stencil plate SVG

Nana Claus stencil plate, as a solid black shape — Nana Claus stencil plate. The preview is the SVG file itself.

A rounded plate with “NANA CLAUS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.22 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	1,476 mm at this size
Narrowest part	1.6 mm at this size
Nodes	225 curve and line segments

Measured from the file. PNG: 2,000 × 1,650 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.41 mm	375 mm	110	Too fine for most machines
2 × 1.64 in (51 × 42 mm)	0.81 mm	750 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.45 in (76 × 62 mm)	1.2 mm	1,125 mm	12	Vinyl, card and thin sheet
4 × 3.27 in (102 × 83 mm)	1.6 mm	1,500 mm	6	Vinyl, card and thin sheet
6 × 4.91 in (152 × 125 mm)	2.4 mm	2,249 mm	2	Vinyl, card and thin sheet
8 × 6.54 in (203 × 166 mm)	3.3 mm	2,999 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.82 in (305 × 249 mm)	4.9 mm	4,499 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana Claus SVG files

← Nana Claus outline lettering All 12 Nana Claus designs Nana Claus with a drop shadow →