Free Nana Claus SVG

Nana Claus in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Nana Claus in Lilita One, as a solid black shape
Nana Claus in Lilita One. The preview is the SVG file itself.

“Nana Claus” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 79 mm (3.94 × 3.09 in), scales to any size
Pieces9 separate pieces
Outlines to cut12: 9 outer edges and 3 cut-outs
Cut length966 mm at this size
Narrowest part4.5 mm at this size
Nodes207 curve and line segments

Measured from the file. PNG: 2,000 × 1,587 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)1.1 mm245 mm120Vinyl, card and thin sheet
2 × 1.57 in (51 × 40 mm)2.3 mm491 mm30Vinyl, card and thin sheet
3 × 2.36 in (76 × 60 mm)3.4 mm736 mm12Any material, including 3 mm wood and acrylic
4 × 3.14 in (102 × 80 mm)4.6 mm981 mm6Any material, including 3 mm wood and acrylic
6 × 4.71 in (152 × 120 mm)6.9 mm1,472 mm2Any material, including 3 mm wood and acrylic
8 × 6.28 in (203 × 160 mm)9.1 mm1,963 mm1Any material, including 3 mm wood and acrylic
12 × 9.42 in (305 × 239 mm)14 mm2,944 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana Claus SVG files

← Nana Claus in Kaushan Script All 13 Nana Claus designs Nana Claus in Alfa Slab One →