Nana Claus in script and capitals SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Nana” in Pacifico script over “CLAUS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.
What is in the file
| Size | 100 × 81 mm (3.94 × 3.18 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 9: 6 outer edges and 3 cut-outs |
| Cut length | 1,257 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 201 curve and line segments |
Measured from the file. PNG: 2,000 × 1,631 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.81 in (25 × 21 mm) | 0.64 mm | 319 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.62 in (51 × 41 mm) | 1.3 mm | 639 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.42 in (76 × 62 mm) | 1.9 mm | 958 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.23 in (102 × 82 mm) | 2.5 mm | 1,277 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.85 in (152 × 123 mm) | 3.8 mm | 1,916 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.46 in (203 × 164 mm) | 5.1 mm | 2,554 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.7 in (305 × 246 mm) | 7.6 mm | 3,831 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Nana Claus SVG files
-
Nana Claus with stars Solid · 9 pieces
-
Nana Claus outline lettering Outline · 12 pieces
-
Nana Claus stencil plate Solid · one piece
-
Nana Claus with a drop shadow Layered · 4 pieces
-
Nana Claus with a Santa hat Solid · 7 pieces
-
Nana Claus in Pacifico Solid · 2 pieces
-
Nana Claus in Lobster Solid · 3 pieces
-
Nana Claus in Kaushan Script Solid · 9 pieces
← Nana Claus in block capitals All 13 Nana Claus designs Nana Claus with stars →