Free Mimi SVG

Mimi stencil plate SVG

Mimi stencil plate, as a solid black shape — Mimi stencil plate. The preview is the SVG file itself.

A rounded plate with “MIMI” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 52 mm (3.94 × 2.04 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	985 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	48 curve and line segments

Measured from the file. PNG: 2,000 × 1,071 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.52 in (25 × 13 mm)	Over 1.5 mm	250 mm	170	Vinyl, card and thin sheet
2 × 1.03 in (51 × 26 mm)	Over 3 mm	500 mm	45	Any material, including 3 mm wood and acrylic
3 × 1.55 in (76 × 39 mm)	Over 4.6 mm	751 mm	18	Any material, including 3 mm wood and acrylic
4 × 2.07 in (102 × 53 mm)	Over 6.1 mm	1,001 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.1 in (152 × 79 mm)	Over 9.1 mm	1,501 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.14 in (203 × 105 mm)	Over 12 mm	2,002 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.2 in (305 × 158 mm)	Over 18 mm	3,002 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mimi SVG files

← Mimi outline lettering All 12 Mimi designs Mimi with a drop shadow →