Mimi in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mimi” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 27 mm (3.94 × 1.07 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 6 outlines |
| Cut length | 581 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 100 curve and line segments |
Measured from the file. PNG: 2,000 × 602 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.27 in (25 × 7 mm) | 0.79 mm | 148 mm | 250 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.55 in (51 × 14 mm) | 1.6 mm | 295 mm | 80 | Vinyl, card and thin sheet |
| 3 × 0.82 in (76 × 21 mm) | 2.4 mm | 443 mm | 33 | Vinyl, card and thin sheet |
| 4 × 1.09 in (102 × 28 mm) | 3.1 mm | 590 mm | 18 | Any material, including 3 mm wood and acrylic |
| 6 × 1.64 in (152 × 42 mm) | 4.7 mm | 885 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.18 in (203 × 55 mm) | 6.3 mm | 1,181 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.28 in (305 × 83 mm) | 9.4 mm | 1,771 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mimi SVG files
-
Mimi in Amatic SC Solid · 4 pieces
-
Mimi in block capitals Solid · 4 pieces
-
Mimi with a swash underline Solid · 3 pieces
-
Mimi with hearts Solid · 10 pieces
-
Mimi outline lettering Outline · 6 pieces
-
Mimi stencil plate Solid · one piece
-
Mimi with a drop shadow Layered · 4 pieces
-
Mimi with a heart Solid · 5 pieces
← Mimi in Lilita One All 13 Mimi designs Mimi in Amatic SC →