Free Mimi SVG

Mimi with a drop shadow SVG

Mimi with a drop shadow, in layered colours — Mimi with a drop shadow. The preview is the SVG file itself.

“Mimi” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 35 mm (3.94 × 1.37 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	4 outlines
Cut length	1,076 mm at this size
Narrowest part	3.1 mm at this size
Nodes	311 curve and line segments
Layers	2: shadow and words

Measured from the file. PNG: 2,000 × 746 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.35 in (25 × 9 mm)	0.79 mm	273 mm	220	Fine detail: vinyl and paper only, weed with care
2 × 0.7 in (51 × 18 mm)	1.6 mm	547 mm	65	Vinyl, card and thin sheet
3 × 1.04 in (76 × 27 mm)	2.4 mm	820 mm	27	Vinyl, card and thin sheet
4 × 1.39 in (102 × 35 mm)	3.1 mm	1,093 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.09 in (152 × 53 mm)	4.7 mm	1,640 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.78 in (203 × 71 mm)	6.3 mm	2,186 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.18 in (305 × 106 mm)	9.4 mm	3,280 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mimi SVG files

← Mimi stencil plate All 12 Mimi designs Mimi in Pacifico →