Free Mimi SVG

Mimi in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mimi in Lilita One, as a solid black shape
Mimi in Lilita One. The preview is the SVG file itself.

“Mimi” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 33 mm (3.94 × 1.31 in), scales to any size
Pieces6 separate pieces
Outlines to cut6 outlines
Cut length579 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes128 curve and line segments

Measured from the file. PNG: 2,000 × 715 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)Over 1.5 mm147 mm220Vinyl, card and thin sheet
2 × 0.66 in (51 × 17 mm)Over 3 mm294 mm70Any material, including 3 mm wood and acrylic
3 × 1 in (76 × 25 mm)Over 4.6 mm441 mm30Any material, including 3 mm wood and acrylic
4 × 1.33 in (102 × 34 mm)Over 6.1 mm588 mm14Any material, including 3 mm wood and acrylic
6 × 1.99 in (152 × 51 mm)Over 9.1 mm882 mm5Any material, including 3 mm wood and acrylic
8 × 2.66 in (203 × 67 mm)Over 12 mm1,177 mm4Any material, including 3 mm wood and acrylic
12 × 3.98 in (305 × 101 mm)Over 18 mm1,765 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mimi SVG files

← Mimi in Kaushan Script All 13 Mimi designs Mimi in Alfa Slab One →