Mimi in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mimi” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.39 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 4 outlines |
| Cut length | 975 mm at this size |
| Narrowest part | 3.6 mm at this size |
| Nodes | 243 curve and line segments |
Measured from the file. PNG: 2,000 × 1,242 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 15 mm) | 0.91 mm | 248 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.21 in (51 × 31 mm) | 1.8 mm | 495 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.82 in (76 × 46 mm) | 2.7 mm | 743 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.42 in (102 × 62 mm) | 3.7 mm | 991 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.64 in (152 × 92 mm) | 5.5 mm | 1,486 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.85 in (203 × 123 mm) | 7.3 mm | 1,981 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.27 in (305 × 185 mm) | 11 mm | 2,972 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mimi SVG files
-
Mimi in block capitals Solid · 4 pieces
-
Mimi with a swash underline Solid · 3 pieces
-
Mimi with hearts Solid · 10 pieces
-
Mimi outline lettering Outline · 6 pieces
-
Mimi stencil plate Solid · one piece
-
Mimi with a drop shadow Layered · 4 pieces
-
Mimi with a heart Solid · 5 pieces
-
Mimi in Pacifico Solid · 3 pieces
← Mimi in Alfa Slab One All 13 Mimi designs Mimi in block capitals →