Free Mimi SVG

Mimi in Pacifico SVG

Mimi in Pacifico, as a solid black shape — Mimi in Pacifico. The preview is the SVG file itself.

“Mimi” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 33 mm (3.94 × 1.29 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	3 outlines
Cut length	571 mm at this size
Narrowest part	2.7 mm at this size
Nodes	192 curve and line segments

Measured from the file. PNG: 2,000 × 708 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.33 in (25 × 8 mm)	0.69 mm	145 mm	230	Fine detail: vinyl and paper only, weed with care
2 × 0.66 in (51 × 17 mm)	1.4 mm	290 mm	70	Vinyl, card and thin sheet
3 × 0.98 in (76 × 25 mm)	2.1 mm	435 mm	30	Vinyl, card and thin sheet
4 × 1.31 in (102 × 33 mm)	2.7 mm	580 mm	16	Vinyl, card and thin sheet
6 × 1.97 in (152 × 50 mm)	4.1 mm	870 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.62 in (203 × 67 mm)	5.5 mm	1,160 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.94 in (305 × 100 mm)	8.2 mm	1,740 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mimi SVG files

← Mimi with a drop shadow All 12 Mimi designs Mimi in Lobster →