Marching band French horn SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A horn with two turns of coiled tubing, three round valves with their levers, a mouthpipe and a bell that opens to one side. One piece. On the field its part is usually played on a mellophone, which faces forwards.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.53 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 799 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 103 curve and line segments |
Measured from the file. PNG: 2,000 × 1,802 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.58 mm | 203 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.79 in (51 × 46 mm) | 1.2 mm | 406 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.69 in (76 × 68 mm) | 1.8 mm | 609 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.59 in (102 × 91 mm) | 2.3 mm | 812 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.38 in (152 × 137 mm) | 3.5 mm | 1,218 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.18 in (203 × 182 mm) | 4.7 mm | 1,624 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.76 in (305 × 273 mm) | 7 mm | 2,435 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More marching band SVG files
-
Marching band bells with mallets Solid · one piece -
Marching band lyre badge Solid · one piece -
Marching band twirling baton Solid · one piece -
Marching band majorette boot with a tassel Solid · one piece -
Marching band parade banner, blank Solid · one piece -
Marching band hat outline Outline · one piece -
Layered marching band hat in four colours Layered · 6 pieces -
Marching band hat with a plume Solid · one piece
← Marching band trumpet All 16 marching band designs Marching band bells with mallets →