Marching band bells with mallets SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A set of marching bells: ten bars on two rails, long at one end and short at the other, each with two pins, and a pair of round-headed mallets crossed above them. One piece, for the front ensemble.
What is in the file
| Size | 100 × 96 mm (3.94 × 3.79 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 31: 1 outer edge and 30 cut-outs |
| Cut length | 1,445 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 247 curve and line segments |
Measured from the file. PNG: 2,000 × 1,929 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.96 in (25 × 24 mm) | 0.69 mm | 367 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.93 in (51 × 49 mm) | 1.4 mm | 734 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.89 in (76 × 73 mm) | 2.1 mm | 1,101 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.85 in (102 × 98 mm) | 2.7 mm | 1,468 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.78 in (152 × 147 mm) | 4.1 mm | 2,202 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.7 in (203 × 196 mm) | 5.5 mm | 2,936 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.56 in (305 × 294 mm) | 8.2 mm | 4,404 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More marching band SVG files
-
Marching band lyre badge Solid · one piece -
Marching band twirling baton Solid · one piece -
Marching band majorette boot with a tassel Solid · one piece -
Marching band parade banner, blank Solid · one piece -
Marching band hat outline Outline · one piece -
Layered marching band hat in four colours Layered · 6 pieces -
Marching band hat with a plume Solid · one piece -
Marching band silhouette on parade Solid · one piece
← Marching band French horn All 16 marching band designs Marching band lyre badge →