Marching band lyre badge SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The lyre worn on band uniforms: two arms that curl outwards at the top, a yoke, four strings and a sound box on a short stem with a foot. One piece, the same on both sides. The strings are 1.9 mm wide at 100 mm, so cut it large in wood.
What is in the file
| Size | 76 × 100 mm (2.98 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 962 mm at this size |
| Narrowest part | 5.6 mm at this size |
| Nodes | 102 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,533 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.76 × 1 in (19 × 25 mm) | 1.4 mm | 244 mm | 120 | Vinyl, card and thin sheet |
| 1.51 × 2 in (38 × 51 mm) | 2.8 mm | 489 mm | 35 | Vinyl, card and thin sheet |
| 2.27 × 3 in (58 × 76 mm) | 4.3 mm | 733 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.03 × 4 in (77 × 102 mm) | 5.7 mm | 977 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.54 × 6 in (115 × 152 mm) | 8.5 mm | 1,466 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.06 × 8 in (154 × 203 mm) | 11 mm | 1,955 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.08 × 12 in (231 × 305 mm) | 17 mm | 2,932 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More marching band SVG files
-
Marching band twirling baton Solid · one piece -
Marching band majorette boot with a tassel Solid · one piece -
Marching band parade banner, blank Solid · one piece -
Marching band hat outline Outline · one piece -
Layered marching band hat in four colours Layered · 6 pieces -
Marching band hat with a plume Solid · one piece -
Marching band silhouette on parade Solid · one piece -
Drum major mace for a marching band Solid · one piece
← Marching band bells with mallets All 16 marching band designs Marching band twirling baton →