Layered marching band hat in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack: a black hat with its peak, gold bands and an eight-pointed badge, a red plume and a white socket that holds it. Change the plume and the bands to your school colours.
What is in the file
| Size | 62 × 100 mm (2.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 7: 6 outer edges and 1 cut-out |
| Cut length | 835 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 161 curve and line segments |
| Layers | 4: hat, plume, trim and socket |
Measured from the file. PNG: 1,271 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.62 × 1 in (16 × 25 mm) | Over 1.5 mm | 212 mm | 140 | Vinyl, card and thin sheet |
| 1.24 × 2 in (32 × 51 mm) | Over 3 mm | 424 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.86 × 3 in (47 × 76 mm) | Over 4.6 mm | 636 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.48 × 4 in (63 × 102 mm) | Over 6.1 mm | 848 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.73 × 6 in (95 × 152 mm) | Over 9.1 mm | 1,273 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.97 × 8 in (126 × 203 mm) | Over 12 mm | 1,697 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.45 × 12 in (189 × 305 mm) | Over 18 mm | 2,545 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More marching band SVG files
-
Marching band hat with a plume Solid · one piece -
Marching band silhouette on parade Solid · one piece -
Drum major mace for a marching band Solid · one piece -
Marching band snare drum with crossed sticks Solid · one piece -
Marching band bass drum with a blank head Solid · one piece -
Marching band drums, three in a row Solid · one piece -
Marching band sousaphone Solid · one piece -
Marching band trumpet Solid · one piece
← Marching band hat outline All 16 marching band designs Marching band hat with a plume →