Marching band hat outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The plumed hat as a line drawing: the edge of the crown, the peak and the plume as one even line, with the two bands, the quill and barbs of the feather and the outline of an eight-pointed badge. For colouring sheets, foil and pen plotters.
What is in the file
| Size | 62 × 100 mm (2.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 1,070 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 217 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,271 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.62 × 1 in (16 × 25 mm) | 0.51 mm | 272 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.24 × 2 in (32 × 51 mm) | 1 mm | 544 mm | 40 | Vinyl, card and thin sheet |
| 1.86 × 3 in (47 × 76 mm) | 1.5 mm | 815 mm | 15 | Vinyl, card and thin sheet |
| 2.48 × 4 in (63 × 102 mm) | 2 mm | 1,087 mm | 8 | Vinyl, card and thin sheet |
| 3.73 × 6 in (95 × 152 mm) | 3 mm | 1,631 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.97 × 8 in (126 × 203 mm) | 4.1 mm | 2,174 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.45 × 12 in (189 × 305 mm) | 6.1 mm | 3,261 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More marching band SVG files
-
Layered marching band hat in four colours Layered · 6 pieces -
Marching band hat with a plume Solid · one piece -
Marching band silhouette on parade Solid · one piece -
Drum major mace for a marching band Solid · one piece -
Marching band snare drum with crossed sticks Solid · one piece -
Marching band bass drum with a blank head Solid · one piece -
Marching band drums, three in a row Solid · one piece -
Marching band sousaphone Solid · one piece
← Marching band parade banner, blank All 16 marching band designs Layered marching band hat in four colours →