Free Mama Llama SVG

Mama Llama with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Llama with a drop shadow, in layered colours
Mama Llama with a drop shadow. The preview is the SVG file itself.

“Mama Llama” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 83 mm (3.94 × 3.28 in), scales to any size
Pieces5 separate pieces
Outlines to cut15: 5 outer edges and 10 cut-outs
Cut length1,911 mm at this size
Narrowest part5.2 mm at this size
Nodes511 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,677 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)1.3 mm485 mm110Vinyl, card and thin sheet
2 × 1.66 in (51 × 42 mm)2.6 mm971 mm30Vinyl, card and thin sheet
3 × 2.5 in (76 × 63 mm)4 mm1,456 mm12Any material, including 3 mm wood and acrylic
4 × 3.33 in (102 × 85 mm)5.3 mm1,942 mm6Any material, including 3 mm wood and acrylic
6 × 4.99 in (152 × 127 mm)7.9 mm2,912 mm2Any material, including 3 mm wood and acrylic
8 × 6.66 in (203 × 169 mm)11 mm3,883 mm1Any material, including 3 mm wood and acrylic
12 × 9.98 in (305 × 254 mm)16 mm5,825 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama stencil plate All 13 Mama Llama designs Mama Llama with a llama’s face →