Free Mama Llama SVG

Mama Llama in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Llama in Lilita One, as a solid black shape
Mama Llama in Lilita One. The preview is the SVG file itself.

“Mama Llama” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 67 mm (3.94 × 2.65 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length957 mm at this size
Narrowest part3.9 mm at this size
Nodes228 curve and line segments

Measured from the file. PNG: 2,000 × 1,373 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.99 mm243 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.35 in (51 × 34 mm)2 mm486 mm35Vinyl, card and thin sheet
3 × 2.02 in (76 × 51 mm)3 mm729 mm15Vinyl, card and thin sheet
4 × 2.7 in (102 × 68 mm)4 mm972 mm8Any material, including 3 mm wood and acrylic
6 × 4.04 in (152 × 103 mm)5.9 mm1,458 mm2Any material, including 3 mm wood and acrylic
8 × 5.39 in (203 × 137 mm)7.9 mm1,945 mm2Any material, including 3 mm wood and acrylic
12 × 8.09 in (305 × 205 mm)12 mm2,917 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama in Kaushan Script All 13 Mama Llama designs Mama Llama in Alfa Slab One →