Free Mama Llama SVG

Mama Llama outline lettering SVG

Mama Llama outline lettering, drawn as a line — Mama Llama outline lettering. The preview is the SVG file itself.

“Mama Llama” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.59 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	26: 13 outer edges and 13 cut-outs
Cut length	1,773 mm at this size
Narrowest part	1.4 mm at this size
Nodes	447 curve and line segments

Measured from the file. PNG: 2,000 × 1,342 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.36 mm	450 mm	140	Too fine for most machines
2 × 1.32 in (51 × 33 mm)	0.71 mm	901 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)	1.1 mm	1,351 mm	15	Vinyl, card and thin sheet
4 × 2.63 in (102 × 67 mm)	1.4 mm	1,801 mm	8	Vinyl, card and thin sheet
6 × 3.95 in (152 × 100 mm)	2.1 mm	2,702 mm	2	Vinyl, card and thin sheet
8 × 5.26 in (203 × 134 mm)	2.8 mm	3,603 mm	2	Vinyl, card and thin sheet
12 × 7.9 in (305 × 201 mm)	4.3 mm	5,404 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama with hearts All 12 Mama Llama designs Mama Llama stencil plate →