Free Mama Llama SVG

Mama Llama in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Llama in Pacifico, as a solid black shape
Mama Llama in Pacifico. The preview is the SVG file itself.

“Mama Llama” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 83 mm (3.94 × 3.26 in), scales to any size
Pieces3 separate pieces
Outlines to cut8: 3 outer edges and 5 cut-outs
Cut length1,064 mm at this size
Narrowest part2.1 mm at this size
Nodes307 curve and line segments

Measured from the file. PNG: 2,000 × 1,667 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.53 mm270 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.65 in (51 × 42 mm)1.1 mm541 mm30Vinyl, card and thin sheet
3 × 2.48 in (76 × 63 mm)1.6 mm811 mm12Vinyl, card and thin sheet
4 × 3.31 in (102 × 84 mm)2.1 mm1,081 mm6Vinyl, card and thin sheet
6 × 4.96 in (152 × 126 mm)3.2 mm1,622 mm2Any material, including 3 mm wood and acrylic
8 × 6.62 in (203 × 168 mm)4.3 mm2,162 mm1Any material, including 3 mm wood and acrylic
12 × 9.92 in (305 × 252 mm)6.4 mm3,243 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama with a llama’s face All 13 Mama Llama designs Mama Llama in Lobster →