Free Mama Llama SVG

Mama Llama in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Llama in Amatic SC, as a solid black shape
Mama Llama in Amatic SC. The preview is the SVG file itself.

“Mama Llama” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size78 × 100 mm (3.06 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length1,453 mm at this size
Narrowest part2.4 mm at this size
Nodes431 curve and line segments

Measured from the file. PNG: 1,573 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.61 mm369 mm120Fine detail: vinyl and paper only, weed with care
1.56 × 2 in (40 × 51 mm)1.2 mm738 mm30Vinyl, card and thin sheet
2.33 × 3 in (59 × 76 mm)1.8 mm1,107 mm12Vinyl, card and thin sheet
3.11 × 4 in (79 × 102 mm)2.4 mm1,476 mm6Vinyl, card and thin sheet
4.67 × 6 in (119 × 152 mm)3.7 mm2,214 mm2Any material, including 3 mm wood and acrylic
6.22 × 8 in (158 × 203 mm)4.9 mm2,952 mm1Any material, including 3 mm wood and acrylic
9.34 × 12 in (237 × 305 mm)7.3 mm4,429 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama in Alfa Slab One All 13 Mama Llama designs Mama Llama in block capitals →