Free Mama Llama SVG

Mama Llama in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Llama in Alfa Slab One, as a solid black shape
Mama Llama in Alfa Slab One. The preview is the SVG file itself.

“Mama Llama” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 59 mm (3.94 × 2.33 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length1,010 mm at this size
Narrowest part2.6 mm at this size
Nodes227 curve and line segments

Measured from the file. PNG: 2,000 × 1,213 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.66 mm257 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)1.3 mm513 mm40Vinyl, card and thin sheet
3 × 1.77 in (76 × 45 mm)2 mm770 mm18Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)2.6 mm1,026 mm8Vinyl, card and thin sheet
6 × 3.55 in (152 × 90 mm)4 mm1,539 mm3Any material, including 3 mm wood and acrylic
8 × 4.73 in (203 × 120 mm)5.3 mm2,052 mm2Any material, including 3 mm wood and acrylic
12 × 7.09 in (305 × 180 mm)7.9 mm3,078 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama in Lilita One All 13 Mama Llama designs Mama Llama in Amatic SC →