Free Mama Llama SVG

Mama Llama in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Llama in Kaushan Script, as a solid black shape
Mama Llama in Kaushan Script. The preview is the SVG file itself.

“Mama Llama” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 75 mm (3.94 × 2.96 in), scales to any size
Pieces9 separate pieces
Outlines to cut9 outlines
Cut length1,159 mm at this size
Narrowest part1.5 mm at this size
Nodes378 curve and line segments

Measured from the file. PNG: 2,000 × 1,521 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.38 mm294 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.76 mm589 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.25 in (76 × 57 mm)1.1 mm883 mm12Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)1.5 mm1,178 mm6Vinyl, card and thin sheet
6 × 4.51 in (152 × 114 mm)2.3 mm1,766 mm2Vinyl, card and thin sheet
8 × 6.01 in (203 × 153 mm)3 mm2,355 mm1Any material, including 3 mm wood and acrylic
12 × 9.01 in (305 × 229 mm)4.6 mm3,533 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Llama SVG files

← Mama Llama in Lobster All 13 Mama Llama designs Mama Llama in Lilita One →