Mama Bear stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “MAMA BEAR” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.31 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 1,564 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 262 curve and line segments |
Measured from the file. PNG: 2,000 × 1,696 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.43 mm | 397 mm | 110 | Too fine for most machines |
| 2 × 1.68 in (51 × 43 mm) | 0.86 mm | 795 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.53 in (76 × 64 mm) | 1.3 mm | 1,192 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.37 in (102 × 86 mm) | 1.7 mm | 1,589 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.05 in (152 × 128 mm) | 2.6 mm | 2,384 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.74 in (203 × 171 mm) | 3.5 mm | 3,178 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.1 in (305 × 257 mm) | 5.2 mm | 4,767 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mama Bear SVG files
-
Mama Bear with a drop shadow Layered · 5 pieces
-
Mama Bear with a bear’s head Solid · 6 pieces
-
Mama Bear in Pacifico Solid · 3 pieces
-
Mama Bear in Lobster Solid · 4 pieces
-
Mama Bear in Kaushan Script Solid · 8 pieces
-
Mama Bear in Lilita One Solid · 8 pieces
-
Mama Bear in Alfa Slab One Solid · 8 pieces
-
Mama Bear in Amatic SC Solid · 8 pieces
← Mama Bear outline lettering All 13 Mama Bear designs Mama Bear with a drop shadow →