Mama Bear in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mama Bear” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.65 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 14: 8 outer edges and 6 cut-outs |
| Cut length | 850 mm at this size |
| Narrowest part | 3.9 mm at this size |
| Nodes | 214 curve and line segments |
Measured from the file. PNG: 2,000 × 1,373 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.99 mm | 216 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.35 in (51 × 34 mm) | 2 mm | 432 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.02 in (76 × 51 mm) | 3 mm | 648 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.7 in (102 × 68 mm) | 4 mm | 864 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.04 in (152 × 103 mm) | 5.9 mm | 1,295 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.39 in (203 × 137 mm) | 7.9 mm | 1,727 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.09 in (305 × 205 mm) | 12 mm | 2,591 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mama Bear SVG files
-
Mama Bear in Alfa Slab One Solid · 8 pieces
-
Mama Bear in Amatic SC Solid · 8 pieces
-
Mama Bear in block capitals Solid · 8 pieces
-
Mama Bear in script and capitals Solid · 5 pieces
-
Mama Bear with hearts Solid · 10 pieces
-
Mama Bear outline lettering Outline · 14 pieces
-
Mama Bear stencil plate Solid · one piece
-
Mama Bear with a drop shadow Layered · 5 pieces
← Mama Bear in Kaushan Script All 13 Mama Bear designs Mama Bear in Alfa Slab One →