Free Mama Bear SVG

Mama Bear in script and capitals SVG

Mama Bear in script and capitals, as a solid black shape — Mama Bear in script and capitals. The preview is the SVG file itself.

“Mama” in Pacifico script over “BEAR” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.21 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	11: 5 outer edges and 6 cut-outs
Cut length	1,336 mm at this size
Narrowest part	2.2 mm at this size
Nodes	223 curve and line segments

Measured from the file. PNG: 2,000 × 1,644 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.56 mm	339 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.63 in (51 × 41 mm)	1.1 mm	679 mm	30	Vinyl, card and thin sheet
3 × 2.44 in (76 × 62 mm)	1.7 mm	1,018 mm	12	Vinyl, card and thin sheet
4 × 3.26 in (102 × 83 mm)	2.2 mm	1,357 mm	6	Vinyl, card and thin sheet
6 × 4.89 in (152 × 124 mm)	3.4 mm	2,036 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.52 in (203 × 166 mm)	4.5 mm	2,715 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.78 in (305 × 248 mm)	6.7 mm	4,072 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Bear SVG files

← Mama Bear in block capitals All 12 Mama Bear designs Mama Bear with hearts →