Free Mama Bear SVG

Mama Bear in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Bear in Kaushan Script, as a solid black shape
Mama Bear in Kaushan Script. The preview is the SVG file itself.

“Mama Bear” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 75 mm (3.94 × 2.95 in), scales to any size
Pieces8 separate pieces
Outlines to cut11: 8 outer edges and 3 cut-outs
Cut length1,078 mm at this size
Narrowest part1.4 mm at this size
Nodes342 curve and line segments

Measured from the file. PNG: 2,000 × 1,517 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.36 mm274 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.71 mm548 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.25 in (76 × 57 mm)1.1 mm821 mm12Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)1.4 mm1,095 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)2.1 mm1,643 mm2Vinyl, card and thin sheet
8 × 5.99 in (203 × 152 mm)2.8 mm2,190 mm1Vinyl, card and thin sheet
12 × 8.99 in (305 × 228 mm)4.3 mm3,286 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Bear SVG files

← Mama Bear in Lobster All 13 Mama Bear designs Mama Bear in Lilita One →