Free Mama Bear SVG

Mama Bear in Alfa Slab One SVG

Mama Bear in Alfa Slab One, as a solid black shape — Mama Bear in Alfa Slab One. The preview is the SVG file itself.

“Mama Bear” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.33 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	14: 8 outer edges and 6 cut-outs
Cut length	881 mm at this size
Narrowest part	2.7 mm at this size
Nodes	363 curve and line segments

Measured from the file. PNG: 2,000 × 1,213 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.69 mm	224 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)	1.4 mm	448 mm	40	Vinyl, card and thin sheet
3 × 1.77 in (76 × 45 mm)	2.1 mm	671 mm	18	Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)	2.7 mm	895 mm	8	Vinyl, card and thin sheet
6 × 3.55 in (152 × 90 mm)	4.1 mm	1,343 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.73 in (203 × 120 mm)	5.5 mm	1,790 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.09 in (305 × 180 mm)	8.2 mm	2,685 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Bear SVG files

← Mama Bear in Lilita One All 12 Mama Bear designs Mama Bear in Amatic SC →