Mama Bear with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mama Bear” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 85 mm (3.94 × 3.33 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 15: 5 outer edges and 10 cut-outs |
| Cut length | 1,680 mm at this size |
| Narrowest part | 5.2 mm at this size |
| Nodes | 453 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,704 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.85 in (25 × 21 mm) | 1.3 mm | 427 mm | 110 | Vinyl, card and thin sheet |
| 2 × 1.69 in (51 × 43 mm) | 2.6 mm | 853 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.54 in (76 × 64 mm) | 4 mm | 1,280 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.38 in (102 × 86 mm) | 5.3 mm | 1,707 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.08 in (152 × 129 mm) | 7.9 mm | 2,560 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.77 in (203 × 172 mm) | 11 mm | 3,414 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.15 in (305 × 258 mm) | 16 mm | 5,121 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mama Bear SVG files
-
Mama Bear with a bear’s head Solid · 6 pieces
-
Mama Bear in Pacifico Solid · 3 pieces
-
Mama Bear in Lobster Solid · 4 pieces
-
Mama Bear in Kaushan Script Solid · 8 pieces
-
Mama Bear in Lilita One Solid · 8 pieces
-
Mama Bear in Alfa Slab One Solid · 8 pieces
-
Mama Bear in Amatic SC Solid · 8 pieces
-
Mama Bear in block capitals Solid · 8 pieces
← Mama Bear stencil plate All 13 Mama Bear designs Mama Bear with a bear’s head →