Free Mama Bear SVG

Mama Bear in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Bear in Pacifico, as a solid black shape
Mama Bear in Pacifico. The preview is the SVG file itself.

“Mama Bear” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 84 mm (3.94 × 3.31 in), scales to any size
Pieces3 separate pieces
Outlines to cut7: 3 outer edges and 4 cut-outs
Cut length935 mm at this size
Narrowest part2.1 mm at this size
Nodes265 curve and line segments

Measured from the file. PNG: 2,000 × 1,696 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.53 mm237 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.68 in (51 × 43 mm)1.1 mm475 mm30Vinyl, card and thin sheet
3 × 2.53 in (76 × 64 mm)1.6 mm712 mm12Vinyl, card and thin sheet
4 × 3.37 in (102 × 86 mm)2.1 mm950 mm6Vinyl, card and thin sheet
6 × 5.05 in (152 × 128 mm)3.2 mm1,425 mm2Any material, including 3 mm wood and acrylic
8 × 6.74 in (203 × 171 mm)4.3 mm1,900 mm1Any material, including 3 mm wood and acrylic
12 × 10.1 in (305 × 257 mm)6.4 mm2,850 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Bear SVG files

← Mama Bear with a bear’s head All 13 Mama Bear designs Mama Bear in Lobster →