Heart lollipop holder to print and cut by hand SVG
The Valentine heart as a drawing. Print it 85 mm wide on card, cut round the outside of the line with scissors, and cut the two short slanting marks with a craft knife for the stick to pass through.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.56 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 4: 3 outer edges and 1 cut-out |
| Cut length | 666 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 58 curve and line segments |
Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.3 mm | 169 mm | 110 | Too fine for most machines |
| 2 × 1.81 in (51 × 46 mm) | 0.61 mm | 338 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.71 in (76 × 69 mm) | 0.91 mm | 507 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.62 in (102 × 92 mm) | 1.2 mm | 677 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.42 in (152 × 138 mm) | 1.8 mm | 1,015 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.23 in (203 × 184 mm) | 2.4 mm | 1,353 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.85 in (305 × 276 mm) | 3.7 mm | 2,030 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lollipop holder SVG files
-
Sunflower lollipop holder in three colours Layered · 3 pieces -
Flower lollipop holder with leaves Solid · 2 pieces -
Reindeer lollipop holder with a sweet nose Solid · one piece -
Bunny lollipop holder with a sweet tail Solid · one piece -
Valentine lollipop holder heart Solid · one piece -
Candy cane and lollipop holder mitten Solid · one piece -
Ghost lollipop holder cover Solid · one piece -
Butterfly lollipop holder Solid · one piece
← Lollipop holder tag with a heart All 12 lollipop holders Sunflower lollipop holder in three colours →