Butterfly lollipop holder SVG
Four wings with six spots cut from them and two slits down the middle. Weave the stick through the slits and it becomes the body of the butterfly, with the lollipop as its head. Cut 95 mm wide, the wings are 63 mm tall.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.61 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 524 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 94 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,354 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | Over 1.5 mm | 133 mm | 140 | Vinyl, card and thin sheet |
| 2 × 1.33 in (51 × 34 mm) | Over 3 mm | 266 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 1.99 in (76 × 51 mm) | Over 4.6 mm | 399 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.66 in (102 × 67 mm) | Over 6.1 mm | 532 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.98 in (152 × 101 mm) | Over 9.1 mm | 799 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.31 in (203 × 135 mm) | Over 12 mm | 1,065 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.97 in (305 × 202 mm) | Over 18 mm | 1,597 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lollipop holder SVG files
-
Snowman lollipop holder with a window Solid · one piece -
Ice cream cone lollipop holder Solid · one piece -
Lollipop holder tag with a heart Solid · one piece -
Heart lollipop holder to print and cut by hand Outline · 3 pieces -
Sunflower lollipop holder in three colours Layered · 3 pieces -
Flower lollipop holder with leaves Solid · 2 pieces -
Reindeer lollipop holder with a sweet nose Solid · one piece -
Bunny lollipop holder with a sweet tail Solid · one piece
← Ghost lollipop holder cover All 12 lollipop holders Snowman lollipop holder with a window →