Sunflower lollipop holder in three colours SVG
Three loose pieces to stack on the stick: a ring of twelve pointed petals, a smaller ring to sit on top of it, turned so the points fall between, and a pair of leaves. Each has a hole in its middle for the stick.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 74 × 100 mm (2.9 × 3.94 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 6: 3 outer edges and 3 cut-outs |
| Cut length | 698 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 168 curve and line segments |
| Layers | 3: outer petals, inner petals and leaves |
Measured from the file. PNG: 1,494 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.74 × 1 in (19 × 25 mm) | Over 1.5 mm | 177 mm | 130 | Vinyl, card and thin sheet |
| 1.47 × 2 in (37 × 51 mm) | Over 3 mm | 355 mm | 35 | Any material, including 3 mm wood and acrylic |
| 2.21 × 3 in (56 × 76 mm) | Over 4.6 mm | 532 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.95 × 4 in (75 × 102 mm) | Over 6.1 mm | 709 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.42 × 6 in (112 × 152 mm) | Over 9.1 mm | 1,064 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.9 × 8 in (150 × 203 mm) | Over 12 mm | 1,418 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.84 × 12 in (225 × 305 mm) | Over 18 mm | 2,128 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lollipop holder SVG files
-
Flower lollipop holder with leaves Solid · 2 pieces -
Reindeer lollipop holder with a sweet nose Solid · one piece -
Bunny lollipop holder with a sweet tail Solid · one piece -
Valentine lollipop holder heart Solid · one piece -
Candy cane and lollipop holder mitten Solid · one piece -
Ghost lollipop holder cover Solid · one piece -
Butterfly lollipop holder Solid · one piece -
Snowman lollipop holder with a window Solid · one piece
← Heart lollipop holder to print and cut by hand All 12 lollipop holders Flower lollipop holder with leaves →