Ghost lollipop holder cover SVG
A cover, not a card: two ghosts joined at the top of the head by a short fold. Fold it over a round lollipop, glue or tape the sides and tie the stick below with thread. Cut 120 mm tall, each ghost is 44 mm wide, for a lollipop up to 34 mm across.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 37 × 100 mm (1.46 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 408 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 74 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 790 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.37 × 1 in (9 × 25 mm) | 0.61 mm | 104 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 0.74 × 2 in (19 × 51 mm) | 1.2 mm | 207 mm | 60 | Vinyl, card and thin sheet |
| 1.11 × 3 in (28 × 76 mm) | 1.8 mm | 311 mm | 27 | Vinyl, card and thin sheet |
| 1.48 × 4 in (38 × 102 mm) | 2.4 mm | 415 mm | 14 | Vinyl, card and thin sheet |
| 2.23 × 6 in (57 × 152 mm) | 3.7 mm | 622 mm | 5 | Any material, including 3 mm wood and acrylic |
| 2.97 × 8 in (75 × 203 mm) | 4.9 mm | 829 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.45 × 12 in (113 × 305 mm) | 7.3 mm | 1,244 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lollipop holder SVG files
-
Butterfly lollipop holder Solid · one piece -
Snowman lollipop holder with a window Solid · one piece -
Ice cream cone lollipop holder Solid · one piece -
Lollipop holder tag with a heart Solid · one piece -
Heart lollipop holder to print and cut by hand Outline · 3 pieces -
Sunflower lollipop holder in three colours Layered · 3 pieces -
Flower lollipop holder with leaves Solid · 2 pieces -
Reindeer lollipop holder with a sweet nose Solid · one piece
← Candy cane and lollipop holder mitten All 12 lollipop holders Butterfly lollipop holder →