Reindeer lollipop holder with a sweet nose SVG
A reindeer face with antlers, ears and eyes. The stick goes in at the nose hole and back out through a slit at the chin, which leaves a red lollipop sitting where the nose should be. Cut 100 mm tall, the face is 62 mm wide.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 90 × 100 mm (3.52 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 559 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 66 curve and line segments |
| Symmetry | Mirror |
| Also found as | Reindeer sucker holder SVG |
Measured from the file. PNG: 1,798 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.9 × 1 in (23 × 25 mm) | Over 1.5 mm | 142 mm | 110 | Vinyl, card and thin sheet |
| 1.79 × 2 in (45 × 51 mm) | Over 3 mm | 284 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.69 × 3 in (68 × 76 mm) | Over 4.6 mm | 426 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.58 × 4 in (91 × 102 mm) | Over 6.1 mm | 568 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.37 × 6 in (136 × 152 mm) | Over 9.1 mm | 852 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.16 × 8 in (182 × 203 mm) | Over 12 mm | 1,136 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.74 × 12 in (273 × 305 mm) | Over 18 mm | 1,704 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lollipop holder SVG files
-
Bunny lollipop holder with a sweet tail Solid · one piece -
Valentine lollipop holder heart Solid · one piece -
Candy cane and lollipop holder mitten Solid · one piece -
Ghost lollipop holder cover Solid · one piece -
Butterfly lollipop holder Solid · one piece -
Snowman lollipop holder with a window Solid · one piece -
Ice cream cone lollipop holder Solid · one piece -
Lollipop holder tag with a heart Solid · one piece
← Flower lollipop holder with leaves All 12 lollipop holders Bunny lollipop holder with a sweet tail →