Lion face with a sunburst mane SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A round face with sixteen separate flames for a mane, long and short by turns, like the rays of a sun. Bold enough for a sign or a summer camp shirt.
What is in the file
| Size | 100 × 94 mm (3.94 × 3.71 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 710 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 260 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,890 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.94 in (25 × 24 mm) | 0.43 mm | 180 mm | 100 | Too fine for most machines |
| 2 × 1.89 in (51 × 48 mm) | 0.86 mm | 361 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.83 in (76 × 72 mm) | 1.3 mm | 541 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.77 in (102 × 96 mm) | 1.7 mm | 721 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.66 in (152 × 144 mm) | 2.6 mm | 1,082 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.54 in (203 × 192 mm) | 3.5 mm | 1,443 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.32 in (305 × 287 mm) | 5.2 mm | 2,164 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.