Free lion SVG

Lion outline SVG

Lion outline, drawn as a line — Lion outline. The preview is the SVG file itself.

The standing lion as one even line, mane, tail and all, with the edge of the face drawn in. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 62 mm (3.94 × 2.42 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	906 mm at this size
Narrowest part	1.8 mm at this size
Nodes	415 curve and line segments

Measured from the file. PNG: 2,000 × 1,260 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.62 in (25 × 16 mm)	0.46 mm	230 mm	140	Too fine for most machines
2 × 1.23 in (51 × 31 mm)	0.91 mm	460 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.84 in (76 × 47 mm)	1.4 mm	690 mm	15	Vinyl, card and thin sheet
4 × 2.46 in (102 × 62 mm)	1.8 mm	920 mm	8	Vinyl, card and thin sheet
6 × 3.69 in (152 × 94 mm)	2.7 mm	1,381 mm	3	Vinyl, card and thin sheet
8 × 4.92 in (203 × 125 mm)	3.7 mm	1,841 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.38 in (305 × 187 mm)	5.5 mm	2,761 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lion SVG files

← Lion mandala All 14 lions Standing lion with a full mane →