Lioness on the prowl SVG
A lioness walking with her head low and her tail out behind: no mane, a round ear and a long, lean body. She faces right, so she pairs with the lion.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 447 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 213 curve and line segments |
Measured from the file. PNG: 2,000 × 1,025 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 13 mm) | 0.58 mm | 114 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.99 in (51 × 25 mm) | 1.2 mm | 227 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.48 in (76 × 38 mm) | 1.8 mm | 341 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.97 in (102 × 50 mm) | 2.3 mm | 454 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.96 in (152 × 75 mm) | 3.5 mm | 681 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 3.94 in (203 × 100 mm) | 4.7 mm | 908 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.92 in (305 × 150 mm) | 7 mm | 1,362 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Lion cub 
Baby lion sitting 
Lion head with a spiky mane 
Cute lion face 
Lion face with a sunburst mane 
Lion with a crown 
Lion mandala 
Lion outline 