Roaring lion SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A lion with its head thrown up and its jaws open, showing two fangs, with its tail held high. The mane and the eye are cut in.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.43 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 652 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 306 curve and line segments |
Measured from the file. PNG: 2,000 × 1,262 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | 0.3 mm | 166 mm | 140 | Too fine for most machines |
| 2 × 1.23 in (51 × 31 mm) | 0.61 mm | 331 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.85 in (76 × 47 mm) | 0.91 mm | 497 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.46 in (102 × 63 mm) | 1.2 mm | 662 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.7 in (152 × 94 mm) | 1.8 mm | 994 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.93 in (203 × 125 mm) | 2.4 mm | 1,325 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.39 in (305 × 188 mm) | 3.7 mm | 1,987 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.