Free lion SVG

Sitting lion SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sitting lion, as a solid black shape
Sitting lion. The preview is the SVG file itself.

A lion sitting upright in profile with its tail curled on the ground behind it. Tall rather than wide, so it suits bookmarks, cards and the side of a tumbler.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 83 mm (3.94 × 3.27 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length623 mm at this size
Narrowest part2 mm at this size
Nodes254 curve and line segments

Measured from the file. PNG: 2,000 × 1,673 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.51 mm158 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.66 in (51 × 42 mm)1 mm316 mm30Vinyl, card and thin sheet
3 × 2.49 in (76 × 63 mm)1.5 mm475 mm12Vinyl, card and thin sheet
4 × 3.32 in (102 × 84 mm)2 mm633 mm6Vinyl, card and thin sheet
6 × 4.98 in (152 × 126 mm)3 mm949 mm2Any material, including 3 mm wood and acrylic
8 × 6.64 in (203 × 169 mm)4.1 mm1,266 mm1Any material, including 3 mm wood and acrylic
12 × 9.96 in (305 × 253 mm)6.1 mm1,899 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lion SVG files

← Roaring lion All 14 lions Lion lying down →