Standing lion with a full mane SVG
A male lion in profile: a mane of pointed locks, a tufted tail and four planted legs, with the eye, the edge of the face and the haunch cut as fine lines. One piece.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.43 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 623 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 283 curve and line segments |
Measured from the file. PNG: 2,000 × 1,262 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | 0.69 mm | 158 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.23 in (51 × 31 mm) | 1.4 mm | 316 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.85 in (76 × 47 mm) | 2.1 mm | 475 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.46 in (102 × 63 mm) | 2.7 mm | 633 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.7 in (152 × 94 mm) | 4.1 mm | 949 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.93 in (203 × 125 mm) | 5.5 mm | 1,266 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.39 in (305 × 188 mm) | 8.2 mm | 1,899 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Lion silhouette 
Roaring lion 
Sitting lion 
Lion lying down 
Lioness on the prowl 
Lion cub 
Baby lion sitting 
Lion head with a spiky mane 