Free Jesus Loves Me SVG

Jesus Loves Me stencil plate SVG

Jesus Loves Me stencil plate, as a solid black shape — Jesus Loves Me stencil plate. The preview is the SVG file itself.

A rounded plate with “JESUS LOVES ME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,328 mm at this size
Narrowest part	1.7 mm at this size
Nodes	265 curve and line segments

Measured from the file. PNG: 2,000 × 1,408 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.43 mm	337 mm	130	Too fine for most machines
2 × 1.38 in (51 × 35 mm)	0.86 mm	675 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.08 in (76 × 53 mm)	1.3 mm	1,012 mm	15	Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)	1.7 mm	1,349 mm	8	Vinyl, card and thin sheet
6 × 4.15 in (152 × 105 mm)	2.6 mm	2,024 mm	2	Vinyl, card and thin sheet
8 × 5.54 in (203 × 141 mm)	3.5 mm	2,698 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.3 in (305 × 211 mm)	5.2 mm	4,048 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves Me SVG files

← Jesus Loves Me outline lettering All 12 Jesus Loves Me designs Jesus Loves Me with a drop shadow →