Free Jesus Loves Me SVG

Jesus Loves Me in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jesus Loves Me in Lilita One, as a solid black shape
Jesus Loves Me in Lilita One. The preview is the SVG file itself.

“Jesus Loves Me” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 46 mm (3.94 × 1.8 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length738 mm at this size
Narrowest part2.8 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 958 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.71 mm187 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.92 in (51 × 23 mm)1.4 mm375 mm50Vinyl, card and thin sheet
3 × 1.37 in (76 × 35 mm)2.1 mm562 mm21Vinyl, card and thin sheet
4 × 1.83 in (102 × 47 mm)2.8 mm750 mm12Vinyl, card and thin sheet
6 × 2.75 in (152 × 70 mm)4.3 mm1,125 mm4Any material, including 3 mm wood and acrylic
8 × 3.66 in (203 × 93 mm)5.7 mm1,500 mm3Any material, including 3 mm wood and acrylic
12 × 5.5 in (305 × 140 mm)8.5 mm2,249 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves Me SVG files

← Jesus Loves Me in Kaushan Script All 13 Jesus Loves Me designs Jesus Loves Me in Alfa Slab One →