Free Jesus Loves Me SVG

Jesus Loves Me in Amatic SC SVG

Jesus Loves Me in Amatic SC, as a solid black shape — Jesus Loves Me in Amatic SC. The preview is the SVG file itself.

“Jesus Loves Me” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.3 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	13: 12 outer edges and 1 cut-out
Cut length	1,282 mm at this size
Narrowest part	1.8 mm at this size
Nodes	433 curve and line segments

Measured from the file. PNG: 2,000 × 1,690 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.46 mm	326 mm	110	Too fine for most machines
2 × 1.68 in (51 × 43 mm)	0.91 mm	651 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.52 in (76 × 64 mm)	1.4 mm	977 mm	12	Vinyl, card and thin sheet
4 × 3.36 in (102 × 85 mm)	1.8 mm	1,303 mm	6	Vinyl, card and thin sheet
6 × 5.03 in (152 × 128 mm)	2.7 mm	1,954 mm	2	Vinyl, card and thin sheet
8 × 6.71 in (203 × 170 mm)	3.7 mm	2,605 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.07 in (305 × 256 mm)	5.5 mm	3,908 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves Me SVG files

← Jesus Loves Me in Alfa Slab One All 12 Jesus Loves Me designs Jesus Loves Me in block capitals →