Free Jesus Loves Me SVG

Jesus Loves Me outline lettering SVG

Jesus Loves Me outline lettering, drawn as a line
Jesus Loves Me outline lettering. The preview is the SVG file itself.

“Jesus Loves Me” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 44 mm (3.94 × 1.71 in), scales to any size
Pieces13 separate pieces
Outlines to cut29: 13 outer edges and 16 cut-outs
Cut length1,222 mm at this size
Narrowest part1.4 mm at this size
Nodes365 curve and line segments

Measured from the file. PNG: 2,000 × 913 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.36 mm310 mm190Too fine for most machines
2 × 0.87 in (51 × 22 mm)0.71 mm621 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.31 in (76 × 33 mm)1.1 mm931 mm24Vinyl, card and thin sheet
4 × 1.74 in (102 × 44 mm)1.4 mm1,242 mm12Vinyl, card and thin sheet
6 × 2.61 in (152 × 66 mm)2.1 mm1,862 mm4Vinyl, card and thin sheet
8 × 3.48 in (203 × 88 mm)2.8 mm2,483 mm3Vinyl, card and thin sheet
12 × 5.22 in (305 × 133 mm)4.3 mm3,725 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves Me SVG files

← Jesus Loves Me with hearts All 12 Jesus Loves Me designs Jesus Loves Me stencil plate →