Free Jesus Loves Me SVG

Jesus Loves Me in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jesus Loves Me in Pacifico, as a solid black shape
Jesus Loves Me in Pacifico. The preview is the SVG file itself.

“Jesus Loves Me” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 56 mm (3.94 × 2.2 in), scales to any size
Pieces4 separate pieces
Outlines to cut9: 4 outer edges and 5 cut-outs
Cut length780 mm at this size
Narrowest part1.7 mm at this size
Nodes295 curve and line segments

Measured from the file. PNG: 2,000 × 1,152 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.43 mm198 mm160Too fine for most machines
2 × 1.12 in (51 × 28 mm)0.86 mm396 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.68 in (76 × 43 mm)1.3 mm594 mm18Vinyl, card and thin sheet
4 × 2.24 in (102 × 57 mm)1.7 mm792 mm10Vinyl, card and thin sheet
6 × 3.35 in (152 × 85 mm)2.6 mm1,189 mm3Vinyl, card and thin sheet
8 × 4.47 in (203 × 114 mm)3.5 mm1,585 mm2Any material, including 3 mm wood and acrylic
12 × 6.71 in (305 × 170 mm)5.2 mm2,377 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves Me SVG files

← Jesus Loves Me with a cross All 13 Jesus Loves Me designs Jesus Loves Me in Lobster →