Free Jesus Loves Me SVG

Jesus Loves Me in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jesus Loves Me in Alfa Slab One, as a solid black shape
Jesus Loves Me in Alfa Slab One. The preview is the SVG file itself.

“Jesus Loves Me” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 40 mm (3.94 × 1.56 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length762 mm at this size
Narrowest part2.2 mm at this size
Nodes208 curve and line segments

Measured from the file. PNG: 2,000 × 837 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.56 mm194 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.79 in (51 × 20 mm)1.1 mm387 mm60Vinyl, card and thin sheet
3 × 1.18 in (76 × 30 mm)1.7 mm581 mm24Vinyl, card and thin sheet
4 × 1.58 in (102 × 40 mm)2.2 mm774 mm12Vinyl, card and thin sheet
6 × 2.37 in (152 × 60 mm)3.4 mm1,161 mm4Any material, including 3 mm wood and acrylic
8 × 3.16 in (203 × 80 mm)4.5 mm1,548 mm3Any material, including 3 mm wood and acrylic
12 × 4.74 in (305 × 120 mm)6.7 mm2,323 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves Me SVG files

← Jesus Loves Me in Lilita One All 13 Jesus Loves Me designs Jesus Loves Me in Amatic SC →