Free horse SVG

Rocking horse SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rocking horse, as a solid black shape
Rocking horse. The preview is the SVG file itself.

A nursery rocking horse: a stout little horse with a saddle, a curled mane and a short tail, standing on a curved rocker. For baby cards, nursery walls and Christmas.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 75 mm (3.94 × 2.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length590 mm at this size
Narrowest part1 mm at this size
Nodes172 curve and line segments

Measured from the file. PNG: 2,000 × 1,512 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.25 mm150 mm120Too fine for most machines
2 × 1.49 in (51 × 38 mm)0.51 mm300 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)0.76 mm450 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.98 in (102 × 76 mm)1 mm599 mm6Vinyl, card and thin sheet
6 × 4.48 in (152 × 114 mm)1.5 mm899 mm2Vinyl, card and thin sheet
8 × 5.97 in (203 × 152 mm)2 mm1,199 mm1Vinyl, card and thin sheet
12 × 8.95 in (305 × 227 mm)3 mm1,798 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More horse SVG files

← Mare and foal horses All 16 horses Dala horse →