Free horse SVG

Horse head with a flowing mane SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Horse head with a flowing mane, as a solid black shape
Horse head with a flowing mane. The preview is the SVG file itself.

A horse head and neck in profile: pricked ears, a forelock, a long face and a mane in six locks down the crest. Slits mark the eye, the nostril, the cheek and the line of the mane.

What is in the file

Size92 × 100 mm (3.64 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length636 mm at this size
Narrowest part1 mm at this size
Nodes200 curve and line segments

Measured from the file. PNG: 1,854 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.25 mm162 mm100Too fine for most machines
1.85 × 2 in (47 × 51 mm)0.51 mm323 mm25Fine detail: vinyl and paper only, weed with care
2.77 × 3 in (70 × 76 mm)0.76 mm485 mm12Fine detail: vinyl and paper only, weed with care
3.7 × 4 in (94 × 102 mm)1 mm646 mm6Vinyl, card and thin sheet
5.54 × 6 in (141 × 152 mm)1.5 mm969 mm2Vinyl, card and thin sheet
7.39 × 8 in (188 × 203 mm)2 mm1,292 mm1Vinyl, card and thin sheet
11.09 × 12 in (282 × 305 mm)3 mm1,939 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More horse SVG files

← Horse outline All 16 horses Standing horse silhouette →