Free horse SVG

Horse outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Horse outline, drawn as a line
Horse outline. The preview is the SVG file itself.

The standing horse drawn as a single closed line about 2 mm wide: legs, hooves, mane and tail. For pen plotters, foil quills and templates to paint.

What is in the file

Size100 × 100 mm (3.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length1,196 mm at this size
Narrowest part1 mm at this size
Nodes461 curve and line segments

Measured from the file. PNG: 1,996 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm304 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm608 mm25Fine detail: vinyl and paper only, weed with care
2.99 × 3 in (76 × 76 mm)0.76 mm911 mm9Fine detail: vinyl and paper only, weed with care
3.99 × 4 in (101 × 102 mm)1 mm1,215 mm4Vinyl, card and thin sheet
5.99 × 6 in (152 × 152 mm)1.5 mm1,823 mm1Vinyl, card and thin sheet
7.98 × 8 in (203 × 203 mm)2 mm2,430 mm1Vinyl, card and thin sheet
11.98 × 12 in (304 × 305 mm)3 mm3,645 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More horse SVG files

← Horse head outline All 16 horses Horse head with a flowing mane →