Free horse SVG

Horse head outline SVG

Horse head outline, drawn as a line — Horse head outline. The preview is the SVG file itself.

The horse head and neck drawn as one even line about 2 mm wide in a closed loop, mane and ears included. For colouring pages, foil and engraving.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.64 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	718 mm at this size
Narrowest part	2.3 mm at this size
Nodes	228 curve and line segments

Measured from the file. PNG: 1,854 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	0.58 mm	182 mm	100	Fine detail: vinyl and paper only, weed with care
1.85 × 2 in (47 × 51 mm)	1.2 mm	365 mm	25	Vinyl, card and thin sheet
2.77 × 3 in (70 × 76 mm)	1.8 mm	547 mm	12	Vinyl, card and thin sheet
3.7 × 4 in (94 × 102 mm)	2.3 mm	729 mm	6	Vinyl, card and thin sheet
5.54 × 6 in (141 × 152 mm)	3.5 mm	1,094 mm	2	Any material, including 3 mm wood and acrylic
7.39 × 8 in (188 × 203 mm)	4.7 mm	1,459 mm	1	Any material, including 3 mm wood and acrylic
11.09 × 12 in (282 × 305 mm)	7 mm	2,188 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More horse SVG files

← Dala horse All 16 horses Horse outline →