Free horse SVG

Standing horse silhouette SVG

Standing horse silhouette, as a solid black shape
Standing horse silhouette. The preview is the SVG file itself.

A horse standing square in profile with its head up, a short mane and a long tail. A solid shape with only a dot for the eye, for signs, stencils and stable doors.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length623 mm at this size
Narrowest part5.4 mm at this size
Nodes225 curve and line segments

Measured from the file. PNG: 1,996 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.4 mm158 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)2.7 mm316 mm25Vinyl, card and thin sheet
2.99 × 3 in (76 × 76 mm)4.1 mm475 mm9Any material, including 3 mm wood and acrylic
3.99 × 4 in (101 × 102 mm)5.5 mm633 mm4Any material, including 3 mm wood and acrylic
5.99 × 6 in (152 × 152 mm)8.2 mm949 mm1Any material, including 3 mm wood and acrylic
7.98 × 8 in (203 × 203 mm)11 mm1,266 mm1Any material, including 3 mm wood and acrylic
11.98 × 12 in (304 × 305 mm)16 mm1,899 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More horse SVG files

← Horse head with a flowing mane All 16 horses Running horse →